INPUT

 Connectors:

XLR and 1/4" TRS (Pin 2 and tip hot)

 Type:

Electronically balanced/unbalanced, RF filtered

 Impedance:

Balanced > 40 kOhm, unbalanced >20 kOhm

 Max Input Level:

> +22 dBu balanced or unbalanced

 CMRR:

Typically >50 dB at 1 kHz

 OUTPUT

 Connectors:

XLR and 1/4" TRS (Pin 2 and tip hot)

 Type:

Servo-balanced/unbalanced, RF filtered

 Impedance:

Balanced 30 Ohm, unbalanced 15 Ohm

 Max Output Level:

 > +22 dBm balanced, > +20 dBm unbalanced

 SYSTEM PERFORMANCE

Bandwidth:

 20 Hz to 20 kHz, +0/-0.5 dB

Frequency Response:

 0.35 Hz to 90 kHz, +0/-3 dB

Noise:

< -96 dBu, unweighted, 22 kHz measurement bandwidth

Dynamic Range:

 > 118 dB, unweighted

 THD+Noise:

 0.008% typical at +4 dBu, 1 kHz unity gain

 0.08% typical at +20 dBu, 1 kHz, unity gain

 < 0.1% any amount of compression up to 40 dB, 1 kHz

IMD:

 < 0.1% SMPTE

 Interchannel Crosstalk:

 < -80 dB 20 Hz to 20 kHz

Stereo Coupling:

 True RMS Power Summing

 COMPRESSOR

Threshold Range:

 -40 dBu to +20 dBu

Ratio:

 1:1 to infinity:1

Threshold Characteristic:

 Selectable OverEasy? or hard knee

Attack/Release Characteristic:

 AutoDynamic™

Attack Time:

 Program-dependent

Release Time:

 Program-dependent

Output Gain:

 -20 to +20 dB

 LIMITER

 Threshold Range:

 0 dBu to +24 dBu (off)

 Ratio:

 infinity:1

 Limiter Type:

 PeakStopPlus? two-stage limiter

 Stage 1:

 PeakStop? brickwall limiter

 Attack Time:

 Zero

 Release Time:

 Zero

 Stage 2:

 Predictive intelligent program limiter

 Attack Time:

 Program-dependent

 Release Time:

 Program-dependent

FUNCTION SWITCHES

 OverEasy?:

Activates the OverEasy compression function.

 I/O Meter:

Switches between monitoring input and output levels on the Input/Output Level meter.

 Bypass:

Activates the direct input-to-output hard-wire bypass.

OPERATING LEVEL

 (rear panel):

Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels.

 ST Link:

Links channels in stereo pairs. Channels One and Three become the master channels.

INDICATORS

Gain Reduction Meter:

8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB

Input/Ouptut Meter:

 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu

 PeakStop™:

 1 LED to indicate PeakStop™ limiting

Function Switches:

 LED indicator for each front-panel switch

 OPTIONS - Output Transformer

 Per Channel:

Jensen? JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx

 POWER SUPPLY

Operating Voltage:

Switchable: 100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz

 Power Consumption:

 20 Watts

 Fuse:

 100-120 VAC:250 mA Slow Blow

 200-240 VAC:125 mA Type T

 Mains Connection:

 IEC receptacle

 PHYSICAL

 Dimensions:

 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)

 Weight:

 5.2 lbs. (2.4 kg)

 Shipping Weight:

 7.6 lbs. (3.5 kg)

Note: Specifications subject to change without notice.